Smart Trace Systems™ - Flush Mount Grounding Terminal Tracer Wire Grounding Terminals should be installed at each location where grounding is present. When locating a conductor, accuracy is best achieved by using low frequency. Low frequency can only be used if the far end of the conductor is grounded. In the normal (or down) position, the associated tracer wire legs are grounded. By flipping the…
Smart Trace Systems™ – Line Marker Grounding Terminal Tracer Wire Grounding Terminals should be installed at each location where grounding is present. When locating a conductor, accuracy is best achieved by using low frequency. Low frequency can only be used if the far end of the conductor is grounded. In the normal (or down) position, the associated tracer wire legs are grounded. By flipping the…
Smart Trace Systems™ - Standard Mount Tracer Wire Grounding Terminals should be installed at each location where grounding is present. When locating a conductor, accuracy is best achieved by using low frequency. Low frequency can only be used if the far end of the conductor is grounded. In the normal (or down) position, the associated tracer wire legs are grounded.…
Placement and arrangement Grounding anodes should be installed at all dead ends of the tracer wire system to complete the electrical circuit needed to enhance signal for locating purposes. All dead ends need to be grounded for locating purposes regardless of the tracer wire spec installed. All dead ends not brought to surface will be connected to an anode (or…
TRACER-LOCK® Connector is a direct bury, self-stripping, locking connector system used for making connections to underground tracer wire systems. Our innovative and unique design allows the connector to be installed as an “in-line” or “lateral” connector without stripping the tracer wire. Works with sizes 18 thru 8 AWG. Sizes can be mixed or matched. The wide range of sizes is…
